High Torque (Square) Stepper Motors

• Torque: 2.5 to 5,700 Ounce-Inches
• Sizes: NEMA 08, 11, 14, 15, 17, 23, 24, 34 and 42
• 1.8 and 0.9 Degree, Square-Bodied, High-Torque Stepper Motors
• Up to Four Stack Lengths, Several Windings in Each Frame Size
• Four, Six or Eight Lead Wires, Or Conduit Boxes
• Customization and Motor Adders Available
• Drop-In Replacement for Most Competitors, at Huge Savings!

Standard (Round) Stepper Motors

• Torque: 40 to 1,575 Ounce-Inches
• Sizes: NEMA 23, 34 and 42
• 1.8 Degree, Round-Bodied, "Legacy" Motors
• Up to Three Stack Lengths, Several Windings in Each Frame Size
• Six or Eight Lead Wires, Or Conduit Boxes
• Specials and Motor Adders Available
• Save on Drop-In Replacement of Competitors

Permanent Magnet (PM) Stepper Motors

• Torque: 1 to 23 Ounce-Inches
• Sizes: 15 to 57mm Diameter
• Cost-Effective, Brushless Stepper Motors
• Customization and Motor Adders Available
• Drop-In Replacement for Most Competitors
• Low Prices, Huge Selection

IP65 Rated Sealed Stepper Motors

• Torque: 35 to 5,700 Ounce-Inches
• Sizes: NEMA 17, 23, 34 and 42
• 1.8-Degree, High-Torque Stepper Motors
• Up to Four Stack Lengths, Several Windings in Each Frame Size
• Meets Splash-Proof Requirements
• Made for Harsh or Humid Environments
• Protective Shaft Seal for Longer Life Cycle

Stepper Motors with Planetary Gearboxes

• Torque: Up to 4,000 Ounce-Inches
• Sizes: NEMA 11, 17 and 23
• Cost-Effective Stepper Motor with Gearbox
• High-Torque in Compact Package
• Offered in Five Stack Lengths
• Available in 14 Gear Ratios

Stepper Motors with Spur Gearboxes

• Torque: Up to 3,500 Ounce-Inches
• Sizes: NEMA 23 and 34
• Cost-Effective Stepper Motor with Spur Gearbox
• Available Up to 12 Gear Ratios
• Customization is Available

Permanent Magnet (PM) Stepper Motors with Spur Gearboxes

• Torque: 300 to 4000 g-cm of Torque
• Sizes: 24 to 42mm Diameter
• PM Stepper Motor with Integrated Gearbox
• Precise Motion at a Low Cost
• Customization is Available

Hybrid Non-Captive Linear Actuators

• Linear Force: 40 to 279 lbs.
• Sizes: NEMA 11, 17, 23 and 34
• Converts Rotary Motion to Linear Motion
• 6 or 12 Inch Lead Screws, with Several Pitches
• Four and Six-Lead Wire Configurations
• Customization Is Available

Hybrid Threaded Shaft Linear Actuators

• Linear Force: 12.5 oz-in
• Sizes: NEMA 17
• Converts Rotary Motion to Linear Motion
• Four-Lead Wire Configuration
• Customization Is Available

Permanent Magnet (PM) Non-Captive Linear Actuators

• Linear Force: 2 to 22.2 lbs.
• Sizes: 20 to 57mm Diameter
• Converts Rotary Motion to Linear Motion
• Simple, Cost-Effective Design
• Four or Six-Lead Wire Configurations
• Customization Is Available

Permanent Magnet (PM) Captive Linear Actuators

• Linear Force: 2 to 22.2 lbs.
• Sizes: 20 to 42mm Diameter
• Converts Rotary Motion to Linear Motion
• Simple, Cost-Effective Design
• Four or Six-Lead Wire Configurations
• Customization Is Available

Stepper Motors with Integrated Drivers

• Torque: 31 to 1,700 Ounce-Inches
• Sizes: NEMA 17, 23 and 34
• High-Torque, 1.8 Degree Stepper Motors
• Over-Temperature and Short-Circuit Protection
• Microstep Driver, Resolutions up to 1,600spr
• Cable, Connector or Encoder Adder Options
• Special Windings and Shaft Modifications Available

Stepper Motors with Integrated Drivers and Controllers

• Torque: 31 to 425 Ounce-Inches
• Sizes: NEMA 17 and 23
• High-Torque, 1.8 Degree Stepper Motors
• Integrated Driver with Easy-to-Use Controller
• Microstep Driver, Resolutions up to 1,600spr
• Encoder Adder Options
• Special Windings and Shaft Modifications Available
• Easy-to-Use, FREE Software with Purchase

Stepper Drivers with 110VAC or 220VAC Input

• Driver Type: 110VAC or 220VAC Input
• Current Range: 0.5 to 12.5 Amps
• Bilevel, Microstep and Line-Powered Drivers
• PCB, Modular and Enclosed Packaging Styles
• Offered as One to Four-Axis Units
• Driver, Power Supply in Fan-Cooled Packages

Stepper Drivers with DC Input

• Driver Type: DC Input
• Current Range: 0.2 to 12.5 Amps
• High-Performance, Bilevel and Microstep
• Also Available are L/R and Legacy Drivers
• PCB, Modular/Enclosed Packaging Styles
• Offered as Single-Axis Units
• Requires DC Power Supply

Stepper Drivers with Transformer (AC) Input

• Driver Type: Transformer - AC Input
• Current Range: 1.0 to 10.0 Amps
• Bilevel and Microstep Drivers
• PCB, Modular/Enclosed Packaging Styles
• Offered as Single-Axis Units
• Requires Transformer

Pulse Generators

• Linear Ramping Pulse Generator with Bracket
• Compatible with Anaheim Automation Drivers
• Adjustable Base and Max Speeds
• 2 Speed Ranges, Up to 20,000 pulses/second
• Control of Acceleration and Deceleration

Preset Indexers

• Perfect for Repetitive Motion Requirements
• Compatible with Anaheim Automation Drivers
• Internal Index Count Switches
• Inputs for External Count Modules
• Pulse Rates up to 14,792 Pulses Per Second
• Index on the Fly Capability

Programmable Controllers

• Cost-Effective Motion System
• Compatible with Anaheim Automation Drivers
• Command Sets: 18 or 40 Simple Commands
• Can Daisy-Chain to Control up to 99 Axes
• Easy-to-Use, FREE Software with Purchase
• Compact and Rugged Modular Packaging

Stepper Drivers with Pulse Generators

• Driver Type: Drivers/Pulse Generators
• Current Range: 0.5 to 10.0 Amps
• Bilevel and Microstep Drivers
• PCB, Modular/Enclosed Packaging Styles
• Offered as Single-Axis Units
• Driver, Pulse Generator and Power Supply Packages

Stepper Drivers with Preset Indexers

• Driver Type: Drivers/ Preset Indexers
• Current Range: 0.5 to 12.5 Amps
• High-Performance, Bilevel and Microstep Drivers
• Offered as One or Two-Axis Units
• Counter Modules Available Separately
• Driver, Indexer and Power Supply Packages

Stepper Drivers with Programmable Controllers

• Driver Type: Drivers/Controllers
• Current Range: 0.5 to 10.0 Amps
• Bilevel and Microstep Drivers
• Modular and Enclosed Packaging Styles
• Single-Axis, Daisy-Chained for Multi-Axes
• Driver, Controller and Power Supply Packages
• Easy-to-Use, FREE Software with Purchase

Brushless Motors

• Torque: 0.7 to 900 Ounce-Inches
• Sizes: Ten sizes from NEMA 09 to 48
• Huge Selection with a Large Stock Base
• Ideal Solution for Velocity Control Applications
• Customization for Voltage, Current and Max Speed
• Round-Bodied, Square Flange and Square-Faced Styles
• Shaft Modifications and Motor Adders Available

IP65 Rated Sealed Brushless Motors

• Torque: 0.7 to 900 Ounce-Inches
• Sizes: NEMA 23 and 34
• Meets Splash-proof Requirements
• Ideal for Harsh or Humid Environments
• Protective Shaft Seals for Longer Life Cycles
• Up to Five Stack Lengths, Several Windings
• Customization and Motor Adders Available

Brushless Motors with Planetary Gearboxes

• Sizes: NEMA 09, 11, 17 and 23
• Speeds: Less than 500 to 15,000RPM
• Closed-Loop Control for Velocity Applications
• Round-Bodied BLDC Motor/Planetary Gearbox
• Shaft Modifications and Motor Adders Available

Brushless Motors with Spur Gearboxes

• Sizes: NEMA 23 and 34
• Speeds: Less than 225 to 11000 RPM
• Closed-Loop Control for Velocity Applications
• BLDC Motor Integrated with Spur Gearbox
• Shaft Modifications and Motor Adders Available

Brushless Motors with Integrated Speed Controllers

• Speed: Up to 4,000RPM
• Sizes: NEMA 17 and 23
• DC Brushless Motor with Built-In Speed Controller
• Matched Components Eliminates Selection Errors, Reduces Wiring
• Customization for Voltage, Current, and Max Speed is Available
• Protection Against Over-Current, Hall Sensor Error, and Under-Voltage
• Shaft Modifications and Motor Adders Are Available

Brushless Speed Controllers - Board Mount

• Input Ranges: 6 to 50VDC
• Max Power: 24 to 250 Watts
• Peak Current: 3 to 10Amps
• Low-Cost Speed Controllers
• Covers a Wide Range of Motors
• Printed Circuit Board Style
• Overcurrent and Undervoltage Protection

Brushless Speed Controllers - Under 1HP

• Input Ranges: 10 to 50VDC or 85 to 135VAC
• Max Power: 75 to 500 Watts
• Peak Current: 5 to 60Amps
• Low-Cost Speed Controllers
• Covers a Wide Range of Motors
• Huge Selection, Six Different Series Offered
• Printed Circuit Board and Enclosed Styles
• Over-Current and Under-Voltage Protection

Brushless Speed Controllers - 1HP and Over

• Input Ranges: 20 to 50VDC, or 85 to 135VAC
• Max Power: 750 to 1,500 Watts
• Peak Current: 15 to 60Amps
• Low-Cost Speed Controllers
• Covers a Wide Range of Motors
• Three Different Series Offered
• Enclosed Styles
• Over-Current and Under-Voltage Protection

Small DC Motors

• Torque: 0.3 to 18.5 Ounce-Inches
• Sizes: From 20mm to 52mm
• Cost-Effective Rotary Motion Control
• DC Motors are Fully Reversible
• Medical, Pump, Semiconductor Applications
• Popular for Robotics and Hobbyists
• Customization and Motor Adders Available
• Designed for High-Volume Applications (many items in stock for user customers)

56C Permanent Magnet DC Motors

• Torque: 288 to 576 oz-in
• Frame Size: 56C
• Speed: 1800 and 2500 RPM
• Cost-Effective Rotary Motion Control
• DC Motors are Fully Reversible
• Totally enclosed fan cooled (TEFC)
• Class F Insulation Means Max Temp up to
   221° F with Full Load

Permanent Magnet (PM) DC Motors with Planetary Gearboxes

• Sizes: From 22mm to 60mm
• Continuous Torque: Up to 4,166 oz-in
• Speed: Up to 1,350 RPM
• Gear Ratios Ranging from 3.6:1 to 720:1
• Custom Versions are Available

Permanent Magnet (PM) DC Motors with Spur Gearboxes

• Sizes: From 24mm to 83mm
• Continuous Torque: Up to 2,750 oz-in
• Speed: Up to 1,000 RPM
• Gear Ratios Ranging from 3:1 to 3000:1
• Custom Versions are Available

Permanent Magnet DC Motor with Worm Gearboxes

• Sizes: From 48mm to 95mm
• Continuous Torque: Up to 850 oz-in
• Speed: Up to 240 RPM
• Gear Ratios Ranging up to 81:1
• Custom Versions are Available

Standard Permanent Magnet (PM) DC Motors with Gearboxes

• Size: 90mm
• Continuous Torque: Up to 4,166 oz-in
• Speed: Up to 1,000 RPM
• Gear Ratios Ranging from 3:1 to 200:1
• Custom Versions are Available

DC Speed Controllers

• Low-Cost Speed Controller
• Printed Circuit Board Style
• Screw-Type Terminal Blocks for Easy Installation
• Compatible with DC Brush Motors up to 10A Peak and 50V
• Additionally an External Voltage Can Be Used To Control Speed
• Short-Circuit and Over-Current Limiting Protection
• Over-Voltage Protection

AC Induction Motors

• Torque: 5.38 to 122 Ounce-Inches
• Sizes: Sixteen Series from 60mm to 100mm
• Round-Bodied with Square Mounting Flange
• Self Starting
• Reversible
• Huge Selection, Low-Cost AC Induction Motors
• Customization for Specific Requirements Available
• Shaft Modifications and Motor Adders Available

AC Synchronous Motors

• Torque: 42 to 1,699 Ounce-Inches
• Sizes: Six Sizes from 55mm to 150mm
• Low-Cost AC Synchronous Motors
• Round-bodied with Square Mounting Flange
• Comes with Matching Capacitor and Resistor
• Customization for Optimizing Current, Voltage, Torque and Max Speed
• Shaft Modifications and Motor Adders Available

AC Industrial Motors

• Rated Torque: 170 to 600 Ounce-Inches
• IEC Frame Sizes: 63, 71 and 80
• 200W to 750W Motor Capacity
• 3 Phrase Operation at 220VAC OR 380VAC
• All Motors are rated IP55
• Lower Heat Generation compared to Competitors; Increased life time
• Flange Mount or Foot (leg) mount options available
• Output shaft's oil seal prevents dust and water damage

AC Induction Gearmotors

• Torque:16 to 5,664 Ounce-Inches
• Sizes: Five Sizes from 60mm to 100mm
• Low-Cost AC Motors with Spur Gearboxes
• Offered in Fourteen Gear Ratios
• Round-Bodied with Square Mounting Flange
• Customization for Specific Requirements Available
• Shaft Modifications and Motor Adders Available
• Reversible

AC Synchronous Gearmotors

• Torque: Up to 56 Ounce-Inches at 30rpm
• Sizes: 44mm and 50mm
• Low-Cost AC Synchronous Gearmotors
• Round-bodied with Square Mounting Flange
• Frequently Used in Appliances, Displays, Printers, Timers, Pumps, etc.
• Customization for Optimizing Current, Voltage, Torque and Max Speed
• Shaft Modifications and Motor Adders Available

AC Speed Controllers

• Input Range: 110VAC or 220VAC
• Max Power: 25W to 200 Watts
• Closed Loop Operation Available
• RPM Display Available
• Simple, Cost-Effective Design
• Small package designs
• Covers a wide range of motor applications
• Customization Is Available

AC Servo: 200-1000 Watts

• Torque: 273-4,064 oz-in
• Max Speed: 1,500-4,500 RPM
• Flange Size: 60-130mm
• AC Servo Motor with Encoder
• IP65 Sealed
• 2,500 CPR Encoder
• Medium Inertia to Maximum Torque
• Brakes and Shaft Options Available

AC Servo: 1500-2500 Watts

• Torque: 1,350-8,114 oz-in
• Max Speed: 1,500-3,000 RPM
• Flange Size:80-180mm
• AC Servo Motor with Encoder
• IP65 Sealed
• 2,500 CPR Encoder
• Medium Inertia to Maximum Torque
• Brakes and Shaft Options Available

AC Servo: 3000-5000 Watts

• Torque: From 6,089-16,299 oz-in
• Max Speed: 1,500-3,000 RPM
• Flange Sizes: 180mm
• AC Servo Motor with Encoder
• IP65 Sealed
• 2,500 CPR Encoder
• Medium Inertia to Maximize Torque
• Brakes and Shaft Options Available

AC Servo Drives

• High-Speed, High-Precision Servo Drives
• Power Rating from 200 to 5,000 Watts
• Industrial-Grade Intelligent Power Modules
• High Overload and Disturbance Rejection
• Higher Start-Up Torque than Most Servos
• Modbus for Networking up to 32 Motors

52mm Assembly Height

• Up to 224N of Peak Force
• Up to 1,920 Watts
• Overlapping Windings for Shorter Overall Length
• Superior Thermal Efficiency
• Features I Beam design

87mm Assembly Height

• Up to 606N of Peak Force
• Up to 1,814 Watts
• Overlapping Windings for Shorter Overall Length
• Superior Thermal Efficiency
• Features I Beam design

154mm Assembly Height

• Up to 1,048N of Peak Force
• Up to 4,147 Watts
• Overlapping Windings for Shorter Overall Length
• Superior Thermal Efficiency
• Features I Beam design

138mm Assembly Height

• Up to 3,558N of Peak Force
• Up to 9,677 Watts
• Overlapping Windings for Shorter Overall Length
• Superior Thermal Efficiency
• Features I Beam design

HMI-KCO

• 65536 true color TFT LCD
• 32-bit, 400MHz and 520 MHz RISC CPU
• 8M FLASH ROM and 16M SDRAM
• 256KB recipe memory
• Powerful timer function
• Supports simultaneous communication of multiple serial ports

HMI-ATO

• Monochrome STN LCD
• High-functional CPU
• Space saving design
• PLC ports allow you to monitor and control the variables of additionally connected devices
• 500 interactive programmable pages
• Various bitmap fonts supported
• Supports RS232/RS422

HMI-ATO

• Program HMI and PLC with one program
• Up to 32 PLC I/O Ports
• 28 Basic commands, 220 application commands
• Easy to read STN LCD
• COM Ports: (1) RS232C and (1) RS422 or (2) RS232C
• High-functional CPU
• Various bitmap fonts supported

Economy Gearboxes

• Sizes: NEMA 23, 34 and 42
• Gear Ratios: Up to 33 Ratios from 3:1 to 1,000:1
• Backlash: As Low as 7 Arc-Min for Precision Series
• Torque Up To 40,356 Ounce-Inches
• Precision Clamping System
• Compatible with Most Servo, Stepper, AC or DC Motors
• Maintenance-Free, Lifetime Lubrication

High-Grade Gearboxes

• Sizes: NEMA 17, 23, 34, and 42
• Gear Ratios: From 3:1 to 512:1
• Backlash: As low as 8 Arc-Min
• Torque Up To 2,313 In-Lbs.
• Precision Clamping System
• Compatible with Most Servo, Stepper, AC or DC Motors
• Maintenance-Free, Lifetime Lubrication

Right-Angle Planetary Gearboxes

• Sizes: NEMA 17, 23, 34 and 42
• Gear Ratios: 22 Ratios from 3:1 to 512:1
• Backlash: As low as 5 Arc-Min
• Torque Up To 36,816 Ounce-Inches
• Right Angle Ideal for Redirecting Power Flow
• Maintenance-Free, Lifetime Lubrication
• Compatible with Most Servo, Stepper, AC or DC Motors

Rotating Output Flange Gearboxes

• Sizes: NEMA 23, 34 and 42
• Gear Ratios: Ratios from 3:1 to 64:1
• Backlash: As Low as 16 Arc-Min
• Life: 30,000 Hours Design Life
• Torque Up To 40,356 Oz-In (
• Patented Precision Clamping System
• High Durability, 96% Efficiency
• Maintenance-Free, Lifetime Lubrication

ACP-G Gearheads

• Sizes: 60mm, 70mm, 80mm, and 90mm
• Gear Ratios: Up to 20 Ratios from 3.6:1 to 1800:1
• Torque Up To 2,777 Ounce-Inches
• To be mated with ACP-MxI AC Induction Motors
• Cost-Effective Solution
• Strengthened Gearhead option for select models

15mm Rails and Blocks

• Size: 15mm Linear Guide Rail
• Dynamic Load: Up to 2,020 lbs.
• Static Load: Up to 3,930 lbs.
• Rail Lengths Up to 4 Meters in Stock
• Matched Bearing Blocks 3 Lengths
• End-Seal Options: Standard or Reinforced
• Pre-Load Classes: Standard, Light or Medium

20mm Rails and Blocks

• Size: 20mm Linear Guide Rail
• Dynamic Load: Up to 4,675 lbs.
• Static Load: Up to 9,730 lbs.
• Rail Lengths Up to 4 Meters in Stock
• Matched Bearing Blocks 3 Lengths
• End-Seal Options: Standard or Reinforced
• Pre-Load Classes: Standard, Light or Medium

25mm Rails and Blocks

• Size: 25mm Linear Guide Rail
• Dynamic Load: Up to 5,260 lbs.
• Static Load: Up to 10,900 lbs.
• Rail Lengths Up to 4 Meters in Stock
• Matched Bearing Blocks 3 Lengths
• End-Seal Options: Standard or Reinforced
• Pre-Load Classes: Standard, Light or Medium

30mm Rails and Blocks

• Size: 30mm Linear Guide Rail
• Dynamic Load: Over 5,260 lbs.
• Static Load: Over 10,900 lbs.
• Rail Lengths Up to 4 Meters in Stock
• Standard and Wide Matched Bearing Blocks
• End-Seal Options: Standard or Reinforced
• Pre-Load Classes: Standard, Light or Medium

3mm Rails and Blocks

• Size: 3mm Linear Guide Rail
• Dynamic Load: Up to 83 lbs.
• Static Load: Up to 180 lbs.
• Rail Lengths Up to 1 Meter
• Matched Bearing Blocks
• End-Seal Options: Standard or Reinforced
• Pre-Load: Clearance, Standard, or Light

5mm Rails and Blocks

• Size: 5mm Linear Guide Rail
• Dynamic Load: Up to 138 lbs.
• Static Load: Up to 295 lbs.
• Rail Lengths Up to 1 Meter
• Matched Bearing Blocks
• End-Seal Options: Standard or Reinforced
• Pre-Load: Clearance, Standard, or Light

7mm Rails and Blocks

• Size: 7mm Linear Guide Rail
• Dynamic Load: Up to 353 lbs.
• Static Load: Up to 706 lbs.
• Rail Lengths Up to 1 Meter
• Matched Bearing Blocks
• End-Seal Options: Standard or Reinforced
• Pre-Load: Clearance, Standard, or Light

9mm Rails and Blocks

• Size: 9mm Linear Guide Rail
• Dynamic Load: Up to 573 lbs.
• Static Load: Up to 1,122 lbs.
• Rail Lengths Up to 1 Meter
• Matched Bearing Blocks
• End-Seal Options: Standard or Reinforced
• Pre-Load: Clearance, Standard, or Light

12mm Rails and Blocks

• Size: 12mm Linear Guide Rail
• Dynamic Load: Up to 915 lbs.
• Static Load: Up to 1,753 lbs.
• Rail Lengths Up to 1 Meter
• Matched Bearing Blocks
• End-Seal Options: Standard or Reinforced
• Pre-Load: Clearance, Standard, or Light

15mm Rails and Blocks

• Size: 15mm Linear Guide Rail
• Dynamic Load: Up to 1,512 lbs.
• Static Load: Up to 2,828 lbs.
• Rail Lengths Up to 1 Meter
• Matched Bearing Blocks
• End-Seal Options: Standard or Reinforced
• Pre-Load: Clearance, Standard, or Light

Standard Precision Acme Screws

• Travel Options: 0.4 - 18 Inches
• Accuracy: 0.003 Inches
• Speed: Up to 12 Inches Per Sec.
• Heavy Duty Applications, Up to 8,000 lbs.
• Motor and Encoder and Cable Options

High Precision Ball Screws

• Travel Options: 200 - 12400mm
• Accuracy: 20µm
• Speed: Up to 59 Inches Per Sec.
• Motor and Encoder and Cable Options
• Build Part Number to your Requirements

Optical Rotary Encoders

• Low-Cost; Compact Rugged Housing
• Accepts ± .010" Axial Shaft Play
• Tracks 0 to 100,000 Cycles Per Second
• Compatible with .059" to 1.00" shaft size diameters
• 32 to 2,500 Cycles Per Revolution (CPR)
• 128 to 10,000 Pulses Per Revolution (PPR)
• Operating Temperature of -40 to +100°C
• Optional Third Index Channel
• 2-Channel Quadrature Squarewave Outputs
• RoHS Compliant and REACH Certified

Magnetic Rotary Encoders

• 8-14 Bit Programmable Resolution
• Accepts ± .005" Axial Shaft Play
• Tracks 0 to 200,000 Cycles Per Second
• Compatible with .125" to 1.125" shaft size diameters
• 100 to 2,560 Cycles Per Revolution (CPR)
• 128 to 10,000 Pulses Per Revolution (PPR)
• Operating Temperature of -40 to +100°C
• Optional Third and fourth Index Channel
• 2-Channel Quadrature Squarewave Outputs
• RoHS Compliant

Integral Clamp

• Type: Clamp Type Coupling
• Screw Torque: Up To 25 Ounce-Inches
• Variety of Outside, Minor and Major Diameters
• Never Requires Maintenance
• No Backlash

Set Screw

• Type: Set Screw Type Coupling
• Screw Torque: Up To 80 Ounce-Inches
• Variety of Outside, Minor and Major Diameters
• Never Requires Maintenance
• No Backlash

L-Type

• Type: Clamp Type Coupling
• Screw Torque: Up To 800 Ounce-Inches
• Variety of Outside, Minor and Major Diameters
• Never Requires Maintenance
• No Backlash

KTR-Type

• Type: Clamp Type Coupling
• Screw Torque: Up To 1,488 Ounce-Inches
• Variety of Outside Diameters
• Low Mass Moment of Inertia
• Zero Backlash

EKL-Type

• Type: Clamp Type Coupling
• Screw Torque: Up to 1,130 Ounce Inches
• Short Compact Design
• Vibration damping
• Backlash-free

Stepper Motor Control

• Controls two-phase Bipolar and four-phase Unipolar motors
• Two PWM and Four Phase outputs for H-Bridge control.
• Supply Voltage: 3V to 5.5V
•Full, 1/2, 1/4, 1/8, 1/16, 1/32, step mode
• PWM chopper circuit for current control
• 8-bit PWM resolution
• Max step rate of 30k per second

Brushless Motor Control

• Open or closed loop control
• 3 or 4 phase operation
• OVERCURRENT SENSING disables output drivers
• Speed controlled by Pulse Width Modulation of output drivers
• HALL SENSOR inputs control output commutation sequence for electrical sensor spacings of 60°, 120°, 240°, or 300°

AC Motor Control

• Touch or Pushbutton input controls
• Up to 10 selectable speed (power) levels
• A selected speed level input becomes an output that can drive a LED to indicated the selected speed
• Operates with 50/60Hz line frequency
• Rugged, latchup-free process technology

Encoder Interface

• Interfaces Incremental Encoders to up/down Counters
• Converts Quadrature Pulses to up/down Counter Controls
• Index I/O (LSI-LS7082N)
• 4.5V to 10V Operation
• x1, x2, x4 Frequency Multiplication:
• Programmable output clock pulse width

Incremental Rotary Encoder Adders

• Single-Ended or Differential Encoders
• Low-Cost, Compact Rugged Housing
• For NEMA 08 to 42 Motors
• Tracks from 0 to 100,000 Cycles/Second
• 32 to 2,500 Cycles per Revolution
• Encoder Cables Available, Purchased Separately. See Series Spec Sheet for matching cable part numbers.

Friction Brakes

• Compact Friction Brakes Available in 4 Series
• NEMA 23: Up to 80 Ounce-Inches Torque
• NEMA 34: Up to 1,152 Ounce-Inches Torque
• NEMA 42: Up to 1,152 Ounce-Inches Torque
• Purchased Separately or as Motor Adders

Cables for Individual Products

Motor Cables Cut-to-Length

Communication Cables

Unregulated Open Frame

Switching Open Frame

Switching Enclosed

Transformers

Data Converters

• RS232-RS422 and RS232-RS485 Models
• Bi-Directional Data Converters
• Unit with Power Supply or PC Port-Powered
• Noise Immunity Over Long Distances
• Compatible with Anaheim Automation Controllers

Amp

• Fits on Motors and Cables
• Convenient and Durable
• Easy to Connect and Disconnect
• RoHS Compliant

Mini-Fit Jr.

• Fits on Motors and Cables
• Perfect for Wire-to-Wire Configurations
• Ideal for Power Applications up to 9.0A per circuit
• RoHS Compliant